MUTOH VJ-1324 - Test Print Menu

VJ-1324 OPERATION MANUAL 5 Panel setup menu
5-33
5.2 Test Print Menu
Performs nozzle check of the print head and setup list.
TIP
• Refer to the following for the operation procedure of test print.
3.5 Test print
Setup item Description
Nozzle Check Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred prints.
3.5.1 Nozzle check
Mode Print Mode print can be performed.
Used to confirm the following printing conditions.
• Print quality
• Effect
• Pre-heater temperature
• Platen heater temperature
• Dryer temperature
• Adjustment value
3.5.2 Mode print
Setup List Setup list printing is performed.
Used to check the setup item and the user type.
3.5.3 Setup print
— • [Enter] key: "Printing" is displayed on the operation panel and test printing starts.
• [Cancel] key: shifts to the previous menu.
5 Panel setup menu