5
Installation Safety
RECOMMENDATIONS:
Dry - Keep the inverter away from liquids, it should be placed in a
completely dry location.
Cool - Inverters should be installed in an area where the fans are
unobstructed, and away from direct sunlight and heat sources. The
ambient temperature range should be 32-104° F(preferred temperature
of 50-77° F).
Vented - Allow at least 5-10 inches of clearance around the inverter to
allow adequate airow, make sure the vents at the ends of the unit are
not blocked.
Fire Hazard Protection - Do not install the inverter in the same
compartment with the battery or in any compartment that could contact
flammable liquids, and avoid installing it in locations where the fire
protection equipment is required.
Near the battery bank - Install the inverter as close as possible to
the battery bank and connect the inverter to the battery by using the
battery cables in the package. It is better and cheaper to use longer AC
power cables. Excessive battery cable lengths can cause voltage drop.
Low-dust - Avoid installing the inverter in an area with dust, wood
debris, or other particles that may enter the inverter and increase its
internal temperature.
Maintain Cleanliness - Ensure that the machine and its surrounding
environment are kept clean to avoid damage from cockroaches or other
insects.
Placement Requirements:
Make sure there is enough space and follow the user manual for installation.
MWXNE inverter should be placed horizontally. Mount the inverter on a stable
surface, such as a oor, table, or sturdy support, to prevent bouncing and
movement. Choose a location that can support the weight of the inverter. It's
best to use four screws to x the product in place.
Installation Area Requirements:
To Next Page
Loading...
