What to do if my MWXNE Inverter has an output overload?
If your MWXNE Inverter is experiencing an output overload, it means the output current is exceeding the rated power, triggering a delay protection. To resolve this, reduce the load connected to the inverter.
What to do if the MWXNE MW2000 shows an output short circuit?
If the MWXNE Inverter indicates an output short circuit, it signifies a short circuit in the output. You should inspect the output circuit and load to identify and rectify the short circuit.
Why is my MWXNE MW2000 Inverter overheating?
If the MWXNE Inverter is overheating, triggering the over-temperature protection, it's likely due to high temperature. First, check the fan to ensure it's working correctly. Then, try to lower the ambient temperature around the inverter. Also, it may indicate by 2 short buzz.
General| Category | Inverter |
|---|---|
| Output Power | 2000W |
| Peak Power | 4000W |
| Frequency | 50Hz/60Hz |
| Input Voltage | 12V/24V/48V |
| Output Voltage | 110V/220V |
| Protection Features | Overload, overvoltage, short circuit, over temperature |
| Cooling | Fan |
| Model | MWXNE MW2000 |
| Efficiency | ≥90% |
To Next Page
