6
Never allow children to operate or play with the inverter.
Keep the unit away from children. Choose to install the inverter out of
the reach of children.
Keep all accessories out of the reach of children as they could be
dangerous.
SPECIAL NOTES FOR CHILDREN:
Grounding Instructions
- The yellow-green short cable is the ground wire. Our pure sine wave inverters
are equipped with a ground terminal that can be properly grounded or connected
to another designated ground point.
- The grounding connection must be securely fastened and tightly connected
to bare metal. Grounding is strongly recommended when using the inverter in
mobile applications such as RVs or in buildings.
- The ground wire should be properly connected to the grounding system or
grid. The ground wire is usually connected to the grounding electrode, earth
electrode, or grounding device of a building. When wiring, make sure the ground
wire is properly grounded to the metal casing or conductor of other electrical
equipment.
- For more information on grounding, it is recommended to consult Local
and National Electrical Codes (NEC) for specic grounding regulations and
recommendations, as they may vary depending on the circumstances.
To Next Page
Loading...
