To Next Page

To Previous Page

Subject to modication

1.2.2 Usage precautions

For safe work, the following usage precautions must be observed:

— Use the implement designed for the work to be carried out.

— Adjust the indicator rod according to the implement used.

— Ensure the stability and hold of the load in the implement.

— The maximum loading level of the implement must not exceed the lowest side for bulk loads, and not exceed the height

of the backplate for unit loads (see Fig. 1).

— Move the tractor-loader unit carefully.

— Travel with the load at ground level and at moderate speed.

— During a lifting operation and when moving, keep your eyes on the load from when the implement's pivot point (A)

passes the horizontal of the loader's pivot point (B) (see Fig. 2). If necessary, correct the position of the implement so

that the load is never directed towards the driver (see Fig. 3).

(A)

(B)

(A)

(B)

Bulk load Unit load Pallet type

■

1.3 Non-compliance with instructions for safety and use

— MX products are designed to be used at the maximum hydraulic pressure indicated by the manufacturer for the tractor's

specications. Use of excess pressure will result in additional strain and will therefore invalidate the MX equipment

warranty.

— Never make any changes to the hose connections.

— Breaking lead seals will void any liability on the part of MX for all its equipment.

— Any assembly of the MX loader which ignores the recommendations of the MX price list in force at the purchase date

cancels the MX guarantee for the whole supply.

— Any modication to any item supplied by MX (implements, loader, frame, etc.), or installation or use of an implement or

component not recommended by MX on the MX loader, will render the MX guarantee on all supplied items null and void.

— Use only genuine MX spare parts. Do not carry out any modications yourself or have anyone else do so on your MX

loader and its implements (mechanical, electrical, hydraulic or pneumatic specications) without seeking prior approval

in writing from MX. Failure to comply with these rules may make your MX loader hazardous. In the event of damage or

injury, MX shall not be held responsible in any way.

— Warranty cover will cease immediately in the event of failure to observe the standards and instructions for use and

maintenance of the MX loader as stipulated in the user manual. MX shall not be held responsible for accidents that

might result from actions contrary to these restrictions.

■

MX F300 Series User Manual

Questions and Answers: