MX F300 Series - Directions for Use

34
Subject to modication
16. Directions for use
— Each implement has been designed for a specic use and has its
own resistance limits.
— Land clearing and stump pulling are prohibited. This work must
be done with specialized machinery and is not appropriate for
the agricultural loader.
— Use the tractor's driving power to penetrate into the material to
be moved rather than speed, which subjects the loader and
tractor to high stresses.
— When the load to be moved is too big, do not force on the
hydraulic components. The same applies when the rams are
fully extended. Release the control valve levers.
■
— For ground levelling, work at slow speed with an implement-to-
ground angle of 50° at most.
NOTE: Work exibly and carefully.
■
50˚ max