MX F300 Series - Implement Carrier Frames; MX Implement Carrier; EURO Implement Carrier; MX;EURO Frame Switching

26
Subject to modication
10. Models of implement carrier frames
10.1 MX implement carrier frame
■
10.2 EURO implement carrier frame
■
10.3 MX/EURO implement carrier frame
To switch from the MX position (1) to the Euro position (2),
— Remove the pins,
— Tilt the hitching shoes downwards,
— Check that the hitching shoes are held in position by the spring
rods,
— Ret the pins in their initial location.
■
1
2