MX F300 Series - Loader Unhitching

16
Subject to modication
5.4 Control with MX e-PILOT S control valves
See separate instructions for e-PILOT S.
■
6. Loader unhitching
This operation must be carried out by the driver, who must exit the cab and ensure all
manoeuvres are prohibited while working on the loader.
Watch the unhitching/hitching video at www.m-x.eu
The loader must always be connected to an implement of
at least 100 kg in order to unhitch it.
— Choose a level and solid surface.
— Lower the loader in double-action mode until the front axle is
slightly raised, with the implement at on the ground.
— Then activate the notched oating position. Return to neutral.
With the lifting rams fully lled, exposure to the sun will restrict
any unwanted movement in the loader and ensure proper
hitching.
— Apply the hand brake. Stop the engine.
— Get down from the tractor.
■
— Lower the left and right parking stands.
■