18
Subject to modication
— Crowd slightly by moving forwards to release the bracket frames.
— Apply the hand brake. Stop the engine.
NOTE: if the the tractor has an original control valve system with
Mach System 7 couplings, decompress the 3rd function hydraulic
circuit as well.
■
— Fully decompress all the hydraulic circuits.
■
— Disconnect the hydraulics and the electrics. Loader with MACH
System:
- Unlock the housing of the MACH System by pressing the
safety latch on the left, then lift the handle.
■
— Hook the MACH System housing onto its support.
■
To Next Page
Loading...
