Dear user,
We thank you for placing your trust in us and hope that you will nd your MX loader satisfactory in every way.
By taking a few minutes to read this manual, you will be able to obtain the best results from your MX loader to the full,
prolong its service life and ensure safe operation.
This loader user manual is a very important document, so please keep it for future reference as required. Make it
available to any other users and hand it over it to any new owner should your MX loader be sold on.
The illustrations and technical data shown in this document might not exactly correspond to your loader, though operating
conditions will nevertheless remain the same.
The loader should be handed over to the user by the dealer.
The demonstration of the equipment to be delivered should include:
— The safety instructions.
— Hitching and unhitching the loader.
— Hitching and unhitching the implements.
— Full use of the controls.
Should one of these four requirements be omitted, it is your responsibility to contact your dealership
immediately.
You can access the original manuals in English on the www.m-x.eu website:
Click on the English version of the site, then on "Documentation/User Manuals".
MX is a trademark of M-extend France SAS, SIREN 639 200 260, RCS Rennes, 19 Rue de Rennes, BP 83 221 - 35 690
Acigné, France.
Contact only for England, Scotland and Wales :
MX (Handling Equipment) UK Ltd
Hyssop Close
Hawks Green
Cannock
Staordshire
WS11 7XB
Tel: 01543 462787
Email: info@m-x.co.uk
To Next Page
Loading...
Need help?
General
