MyBinding Standard APC45 Programmable - Page 36

28
3-6 Creating a Cutting Program (Delete)
This section explains how to delete the
saved program.
Example: When deleting course number 5.
[Deleting the Saved Program]
Press the button.
- The LED on the upper left of the program
memory button is illuminated and shows that
the “program memory” is selected.
- “SELECT COURSE (1-30)” appears in the
guide window.
Input the course number to delete.
- In this step, for example, input the course
number 5.
- Press the keys on the numeric
keypad. The step 1 of the course number 5
appears on the guide window as shown
below.
Press the 0 key and the key on
the numeric keypad.
- “EXIT?” appears in the guide window.
Press the key.
- “MEMORIZE?” appears in the guide window.
Press the key.
- “NO MEMORY” appears in the guide window.
This is the end of the procedure for deleting
the program.
3:249.52:260
3 /10
COURSE
:
5
SELECT COURSE
(
1-30
)
1
LED
The course
number can
be input.
En
t
5
1:420.0
1 /10
COURSE
:
5
Input the course number 5.
En
t
EXIT?
Y
:
"Ent" N
:
"C"
The exit confirmation
screen appears.
When the key is pressed
after “0” is input,
En
t
En
t
MEMORIZE?
Y
:
"Ent" N
:
"C"
the memory confirma-
tion screen appears.
When the key is pressed,
En
t
En
t
COURSE
:
5
NO MEMORY
the program is deleted.
When the key is pressed,
En
t