2205B0JE-DA-J-N_2014.05.
3 Installation
Screw Compressor J-series 3.1 Precautions for Installation
3-1
3 Installation
3.1 Precautions for Installation
Basically the J-series is delivered as a standard package consisted of the compressor.
Figure 3-1 Appearance of the Package
This chapter 3 is based on the assumption that the compressor is installed to standard packages
for the purpose of refrigeration, cold storage, and air conditioning.
If the package is not standard and the installation procedure is different from the contents of this
manual, prepare an installation procedure manual referring to this chapter and considering
safety precautions, before installing the compressor.
If there are any questions, please contact our local sales offices or service centers.
Insure that installation is performed by a qualified personal or contracting company. Make sure
that the work is performed in compliance with local laws and ordinances.
Read this chapter and related documents, and fully understand their contents before
performing installation.
Electrical work must be performed only by a qualified worker.
Do not let anyone to be or enter any part of body under the lifted compressor.
To Next Page
Loading...