How to connect your D210 with Wi-Fi
Step 1:
Step 2:
Step 3:
Make sure the D210 is in the range of your Wi-Fi network. Switch ON your
D210 and wait for a few seconds until it completes the initialization.
The D210 will scan for available
Wi-Fi networks within its range and will
display a list of their names on the screen.
Find the Wi-Fi network you would
like to use and select it by pressing its
number (from 1 to 6) on the keyboard. If
there are more than 6 available networks
on the list, you can switch to the next page
of the list by pressing (F2).
If you cannot find your Wi-Fi network on
the list, press (X) and D210 will rescan
(search again) for available Wi-Fi
networks. Make sure your D210 is in the
range of your network.
If your Wi-Fi network requires a
password, D210 will display the Wi-Fi
Password screen, where you can enter the
network password. In case your password
contains letters or other symbols, press
the relevant number key several times in
order to select the required character. If
you make a mistake, press the yellow key
(<) to delete the last entry. When you have entered the password, press the
green key (O) in order to complete the operation.
Once it has connected to your Wi-Fi
network, D210 will perform a test of the
connection to myPOS.
If the test is successful the following D210
screen will appear:
EN 8|
To Next Page
Loading...
