N'Finity 3000 - User Manual

Recommendations for mounting height to ensure efficient cooling and uniform room temperature.

Details the dedicated 115-volt, 20-amp circuit and electrical outlet recommendations.

Details on attaching the single-piece mounting bracket to the unit and wall.

Step-by-step process for sliding the unit into the opening and securing it.

Instructions for connecting the drain line tube to remove condensation and prevent warranty issues.

Describes the initial power-on sequence, display indicators, and fan operation.

Explains how the set point is adjusted and the cooling operation based on temperature readings.

Explains the function of each button and symbol on the controller interface.

Lists causes and solutions for ice forming on the evaporator coil.

Addresses issues like the unit not running, no power, or incorrect voltage.

Explains why the cellar temperature might be too warm and provides solutions.

Details causes and solutions for the unit leaking water, including drain line problems.

Addresses scenarios where the unit runs but does not cool, or fans operate without the compressor.

Details the two-year limited warranty for labor and parts, and the five-year compressor warranty.