EasyManuals Logo

NAD C 355BEE Service Manual

NAD C 355BEE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
PREAMPLIFIER SECTION
LINE LEVEL INPUTS
(Disk, CD, Video, Auxiliary, Tuner, Tape 1,Tape 2)
Input impedance (R and C) 200 kohms + 100 pF
Input sensitivity (ref. rated power) 310 mV
Maximum input signal 6 V
Signal / Noise ratio, A-weighted 97.0 dB ref. 1W
(from CD Input to Speakers Output, Volume Setting
for 500mV in , 8ohms 1W out)
Signal to noise ratio preamp out, IHF “A” weighted 110 dB re 500mV
Frequency response, 20 Hz – 20 kHz < +/-0.1 dB (tone defeat on)
< +/-0.2 dB (tone defeat off)
THD + Noise, SMPTE IM < 0.01% at 5 V out
LINE LEVEL OUTPUTS
Pre-amp output impedance 80 ohms
Tape output impedance Source Z + 1kohms
Maximum output level pre-amp out : > 11 V
Tape-out : > 10 V
CONTROLS
Treble +/- 5 dB at 10 kHz
Bass +/- 8 dB at 100 Hz
IR IN and OUT
Input Resistance > 10 kohms
Input Voltage Min 5 V
Output Resistance < 30 ohms
TRIGGER Out
Output Current 50 mA
Output Voltage 12 V
DIMENSIONS AND WEIGHTS
Net Weight 6.5 kg ( 14.3 Ib)
Shipping Weight 8 kg ( 17.6 Ib)
DIMENSION (W×H×D) 435
×
116
×
292MM
7

Other manuals for NAD C 355BEE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NAD C 355BEE and is the answer not in the manual?

NAD C 355BEE Specifications

General IconGeneral
BrandNAD
ModelC 355BEE
CategoryAmplifier
LanguageEnglish

Related product manuals