NAD C 546BEE - Specifications

GENERAL PARAMETERS
Output level Analog: 2.2 ± 0.1 V
Optical: -22.5 ± 3.5 dBm
Coaxial: 650 ± 150 mV
Frequency response ±0.3 dB (ref. 0 dB 20 Hz-1 kHz)
±0.5 dB (ref. 0 dB 5 kHz-20 kHz)
Total harmonic distortion <0.01% (ref. 1 kHz, Audio LPF)
Signal/Noise ratio 118 dB
(ref. 1 kHz, A-weighted LPF Stop, Pause)
Channel balance ±0.5 dB (ref. 0dB 1kHz)
Dynamic range 95 dB
Channel separation >90 dB
De-emphasis -3.73 to -5.33 dB (ref. 0dB 1 kHz, 5 kHz)
-8.04 to -10.04 dB (ref. 0dB 1 kHz, 16 kHz)
Linearity ±0.01 dB (ref. 0dB 1 kHz at -3 dB)
±0.02 dB (ref. 0dB 1 kHz at -6 dB)
±0.02 dB (ref. 0dB 1 kHz at -10 dB)
±0.05 dB (ref. 0dB 1 kHz at -20 dB)
±0.15 dB (ref. 0dB 1 kHz at -60 dB)
Standby power <0.5W
USB
Output level 2.2 ± 0.2 V
Frequency response ±1 dB (ref. 0 dB 20 Hz - 16 kHz)
Total harmonic distortion <0.03% (ref. 0 dB 1 kHz, Audio LPF)
Signal/Noise ratio 118 dB
(ref. 0 dB 1 kHz, A-weighted Pause)
DIMENSION AND WEIGHT
Unit Dimensions (W x H x D) 435 x 306 x 89 mm (Gross)*
17 ¹/₈ x 12 ¹¹/₁₆ x 3 ⁹/₁₆ inches
Net weight 4.9 kg
10.8 lbs
Shipping weight 6.3 kg
13.9 lbs
* - Gross dimensions include feet, extended buttons and rear panel
terminals.
Specications are subject to change without notice. For updated
documentation and features, please log onto www.NADelectronics.com for
the latest information about C 546BEE.
REFERENCE
SPECIFICATIONS
15
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ