NAD C725BEE User Manual

C 725BEE Stereo Receiver
• 50Wx2ContinuousPowerinto8ohms
• 102W,148W,205W,IHFDynamic
powerinto8,4and2ohms,respectively
• PowerDrive
TM
• AM/FMTunerwith40stationpresets
• RDSdataserviceforFM
• ControlsandPlaysDAB(BandIIIandBandL)
withOptionalDB1Module
(230VVersionOnly)
• MultisourceZone2withindependentline
leveloutput
• SpeakerAandBswitching
• SR8SystemRemotecontrol
• ZR5ZoneRemote
• FrontPanelMPInputforattaching
portableMP3Players
• Dataportforusewithoptional
NADdockforiPod
• Headphonessocket
• RelayInputSwitching
• ToroidalPowertransformer
• 7Lineinputs
• AlldiscretecircuitryutilizingClassA
 gainmodules
• Shortsignalpathfrominputtooutput
• AllsocketsGoldplated
• Tonecontrolsdefeatswitch
• Main-ampinput&pre-ampoutput
• SubwooferOutput
• SoftClipping
TM
• IRIn&Out
• 12volttriggeroutput
• RS-232serialinterfaceconnectsto
advancedcontrolandautomationsystems
• <1wattStandbyConsumption

> POSITIONING
The NAD C 725BEE is in a category of one; unique in both performance and capability. Most receivers available today are digital surround sound
AV Receivers. While these are appropriate for Home Theatre use, with very few exceptions they cannot match the performance of a good stereo
amp when driving stereo speakers. The C 725BEE, by contrast, is an analogue design based entirely on our award winning C 325BEE Integrated
Amplifier. By combining all the most desirable features in a one box solution, we can offer the performance of separate high end components and
the convenience of a receiver. All this performance and convenience comes at a far more affordable price than separate components would cost.
> DETAILS
Performance
This is a true BEE (Bjorn Erik Edvardsen) design
with all his latest developments including:
PowerDrive, Distortion Canceling Circuit, BEE
Clamp and an all new and more highly refined
circuit layout. Based on a high current toroidal
transformer – the same type found on our own
high end Masters Series – the C 725BEE can
provide a healthy, ultra low distortion 50 watts
of continuous power.
But more importantly, on a short term dynamic
basis (which is the way music reproduction
demands the power to be delivered) the
C 725BEE can provide as much as 200 watts
depending on the characteristics of the
loudspeaker being driven. If, for any reason,
more power is asked for than the C 725BEE
can provide the exclusive Soft Clipping circuit
prevents the harsh grating sound of hard
clipping distortion.
> FEATURES
continued>

NAD C725BEE Specifications

General

Speaker Load Impedance	4 - 8 ohms
Power Output	50 W per channel (8 ohms)
Total Harmonic Distortion	< 0.03%
Frequency Response	20Hz-20kHz (±0.3dB)
Input Sensitivity	200mV (line)
Signal-to-Noise Ratio	> 100 dB
Dimensions	435 x 100 x 320 mm
Damping Factor	> 100
Input Impedance	47k ohms