Need help?Do you have a question about the NAD C 720BEE and is the answer not in the manual?
General| Frequency Response | 10 Hz - 80 kHz |
|---|---|
| Total Harmonic Distortion | < 0.03% |
| Dimensions | 435 x 100 x 360mm (W x H x D) |
| Weight | 5.6 kg |
| Damping Factor | > 100 |
| Input Impedance | 47 kΩ |
| Speaker Load Impedance | 4 - 8 ohms |
| Input Sensitivity (line) | 200 mV |
| Power Output | 50 W per channel (8 ohms) |
| Input Sensitivity | 200mV |
Essential safety guidelines for handling the stereo receiver during service.
Method to verify electrical insulation resistance of the receiver.
Precautions to prevent damage to sensitive electronic components from static electricity.
Identifies and describes connectors and controls on the rear of the unit.
Identifies and describes controls and indicators on the front of the unit.
Details performance metrics for the power amplifier section.
Details performance metrics for the preamplifier section.
Specifies performance parameters for specific input/output configurations.
Details performance metrics for the FM tuner functionality.
Details performance metrics for the AM tuner functionality.
Outlines the physical dimensions and weight of the unit.
Steps for initial calibration of volume and idling current.
Steps for final calibration after initial adjustments.
Describes special operational modes like factory reset and version display.
To Next Page
