Power Amplifier Section
CONTINUOUS AVERAGE POWER
OUTPUT AT 8 OHMS
50W (17dBw)
(Minimum RMS power per channel, both channels
driven, With no more than the rated distortion)
Rated distortion (THD)(20Hz –20kHz) İ0.03%
Channel Separation ı70dB
(MAIN IN, 20W Out at 8ȍ,1kȍ shorted, 1kHz)
Clipping power, 1kHz 68W
(Maximum continuous power per channel)
Dynamic Headroom at 8 ohms 3.4dB
Dynamic power
8ohms
110W
(Maximum short-term power per channel )
4ohms
160W
2ohms
210W
Damping factor ı100
Slew factor ı50
Slew rate ı20V/ȝsec
T.H.D and SMPTE I.M. İ0.03%
(Distortion from 250mW to rated output)
IHF I.M. (CCIF IM) and T.I.M distortion İ0.03%
(From 250mW to rated output))
Input impedance 22kȍ//470pF
Input sensitivity( For 50 Watts out) ı700mV
Power amp gain 29dB
Preamplifier Section
Input Impedance 22kȍ//100pF
SPECIFICATIONS
NAD C720BEE Stereo Receiver
Note: Specifications are measured in accordance with EIA
Standard RS-490 (IHF A-202) for amplifiers and ANSI-IEEE
Standard 185(1975), i.e. input and converted to equivalent
300-ohm values.
- 5 -
To Next Page
Loading...
