Chapter IV 75 September 2014
This is a prioritized list of available communication compressions. During connection setup the
common compression with the highest priority of both parties is selected. To force a compression all
fields except one can be left empty.
Compression 1:
Compression 2:
Compression 3:
Compression 4:
Auth. Name: Might be provided by the SIP provider in rare cases, otherwise leave this blank.
Proxy: Usually provided by the SIP provider. If not used then leave this blank.
SIP port: Standard is 5060 but can be different for certain SIP providers.
Transport: UDP or TCP selection. Depends on the sip server but normally UDP is used.
To Next Page
Loading...
