3. Setup
12
- Must be performed by a technician -
3-2 Installation Warnings
Install the machine according to the instructions in this Operation Manual. Failure to follow the
instructions may result in a re, electric shock, injury or malfunction. (See “3-5 Setup and Assembly”
on page 18)
Install the machine securely by using the level adjusters. Unstable machine installation may result
in an accident or injury. (See “3-5 Setup and Assembly” on page 18)
Two different types of power cords are supplied with the machine.
Use the power cord with a plug that ts into your local AC outlet. Use
of an inappropriate power cord may result in electric shock or re.
Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in a re
or burns.
Be sure to install the ground wire. Failure to install the ground wire may result in electric shock in
the event of electrical leakage.
3-2-1 Unsuitable Installation Locations
The machine is designed for indoor use. Do not install the machine outdoors. Also, never install the
machine in the following locations.
• A location exposed to direct sunlight
• A location exposed to rain or water leaks
• A damp location
• A dusty location
• A location close to heaters
• A hot location
• An extremely cold location
• A location exposed to condensation caused by temperature differences
• A location that obstructs an emergency exit or re extinguishing equipment
• An unstable location or a location exposed to vibration
To Next Page
Loading...
Need help?
General
