1. Safety
Test Mode
Troubleshooting
5
Precaution / Warning
1-2 Warning
OPERATION
Before operating the machine, read this Operation Manual. Failure to properly install and operate this
machine could result in malfunction or accident. Operate the machine in accordance with the Operation
Manual.
TRANSPORTATION
The cabinet is very heavy and contains fragile components. Use appropriate care when moving or
transporting the cabinet. Avoid rough handling.
HANDLING COMPONENTS
Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD)
events. Do not handle it roughly. Use proper ESD procedures when servicing. Protect components
from harmful environmental conditions, such as extreme temperatures, excessive moisture or other
damaging effects.
DISCONNECT POWER
Always turn off power and unplug the machine before servicing or making adjustments, unless otherwise
instructed. Installing or repairing components while power is on can damage the components and void
the warranty.
GROUNDING
Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the
machine. Only plug into a grounded, three-wire outlet. Do not use a “cheater” plug or cut off the ground
pin on the line cord.
ELECTRICAL SHOCKS
Disconnect AC power before servicing. Verify that there is a working ground connection. If the machine
sustains water damage, stop using it immediately and unplug AC power.
CONNECTORS
Ensure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors
are often keyed and only connect one way. Check for correct orientation.
POWER CORD
If the power cord is damaged or lost, replace it with an identical cord as supplied by the manufacturer
or an authorized service agent. To avoid re or electric shock, be sure to use a power cord suitable for
your local power specications.
OPERATION MANUAL
Keep this Operation Manual available and ready for use. If the machine fails to function properly, turn off
the machine and unplug the power cord. Contact your local distributor. Your warrantee, when applicable,
lasts 60 days from your purchase date. You may not reproduce this document or any of its contents
without written authorization from NAMCO BANDAI Games Inc.
SPECIFICATIONS
For reasons such as performance, this machine’s specications may change without notice. Federal
patent, copyright and other intellectual property laws protect the content, devices and design of the
machine and its equipment.
To Next Page
Loading...
Need help?
General
