Need help?Do you have a question about the NANLITE MixPanel 150 and is the answer not in the manual?
Details DMX IN/OUT XLR pin configurations and required cable specifications.
Details Mode 1 for DMX: 12 channels, setting start addresses for sequential fixtures.
Details Mode 2 for DMX: 7 channels, setting start addresses for sequential fixtures.
Guide on connecting the fixture to power and turning it on safely.
Instructions for operating the fixture in CCT mode, switching between soft and hard light.
How to adjust the brightness of the fixture using the dimmer knob.
Adjusting color temperature in CCT mode using the function knob.
Adjusting the green/magenta balance in CCT mode using the select knob.
Guide to operating the fixture in HSI mode, controlling Hue, Saturation, and Brightness.
Adjusting the brightness of the fixture in HSI mode.
Adjusting the hue value (0-360) in HSI mode.
Adjusting color saturation (0-100%) in HSI mode.
Instructions for controlling Red, Green, Blue, and White color mixing.
How to access the special effects menu and navigate between modes.
Detailed operation of the HUE LOOP effect, including modes and parameters.
Guidelines for safely opening, handling, and using the product after transport.
Warnings about using damaged power cords and ensuring correct voltage supply.
Precautions for safe operation, cleaning, storage, and keeping away from children.
Troubleshooting common faults like power issues, DMX failure, and fan problems.
General| Type | LED Panel Light |
|---|---|
| Wattage | 150W |
| Color Temperature | 2700K - 6500K |
| TLCI | 95 |
| Beam Angle | 120° |
| Power Source | AC 100-240V |
| Control | DMX, App Control, Wireless |
| Dimming | 0-100% |
To Next Page