Page 2
Copyright
This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent
in writing from nano-purification solutions. It may not be distributed through the internet or computer bulletin
board systems without prior consent from nano-purification solutions.
GENERAL INFORMATION
©2012 nano-purification solutions
eHeatless Desiccant Air Dry r: D-Series1 (060-130) Service Manual
Models: NDL-060, 070, 080, 090, 100, 110, 120, 130 (Including ES Model)
Document number: n-psi-D1(060-130)-OM-US-01
Issue: 001
Document Introduction
This manual provides manufacturers prescribed procedures for the maintenance and service procedures for a
nano-purification solutions compressed air dryer. The procedures illustrated in this document are only to be
performed by authorised personnel. For further information regarding the procedures outlined in this document
contact nano-purification solutions before proceeding. Read this document carefully before attempting to
service the dryer.
General Safety
For your own safety, when carrying out maintenance work on the dryer, all relevant national safety regulations
must be complied with relating to pressurised and electrical systems. Only authorised, competent and trained
personnel should maintain the dryer, this user guide is intended solely for such personnel and is to be used
only as a reference, it should not be used to replace conventional training.
NOTES: highlight important sections of information where particular care and attention should
be paid.
CAUTIONS: indicate any situation or operation that may result in potential damage to the
product, injury to the user, or render the product unsafe.
Warranty Guidelines
All dryers are supplied with a 5 year manufacturer’s warranty from the date of purchase. The dryer should be
installed, operated and maintained in accordance with the manufacturer’s guidelines. Only genuine service
parts should be used and no modifications made. For further information please contact us at
support.n-psi.com.
To Next Page
Loading...
