Do you have a question about the Napoleon 9600 Series and is the answer not in the manual?
AFUE Rating | 96% |
---|---|
Blower Type | Variable speed |
Gas Valve | Modulating |
Ignition System | Hot surface ignition |
Fuel Type | Natural gas or propane |
Heat Exchanger | Stainless steel |
Blower Motor | ECM |
Heat Exchanger Warranty | Lifetime limited |
Parts Warranty | 10 years |
Vent Size | 2" or 3" |
Stages | 2-stage |
Heating Capacity | 40, 000 - 120, 000 BTU |
Critical safety warnings for hazards like shock, fire, and explosion.
Explains DANGER, WARNING, and CAUTION symbols used throughout the manual.
Key rules for safe installation, operation, and maintenance of the furnace.
Procedures for calculating maximum hourly heat loss for proper furnace sizing.
Criteria for selecting an appropriate location and required clearances for furnace installation.
Importance of proper airflow, ductwork, and airflow requirements for furnace operation.
Lists approved vent and combustion air piping materials for installations.
Information on gas supply type, piping, and connection to commercial utilities.
Step-by-step instructions for initiating furnace operation after installation.
Procedure to check and verify the furnace's temperature rise for proper airflow.
Detailed operational sequence for ECM X13 and PSC motors, including flame failure.
Guidance on inspecting, cleaning, or replacing the air filter for optimal performance.
Visual guide to diagnose furnace faults using flowcharts, LED codes, and history.
Recommendations for annual professional inspection of heat exchanger, burners, and system operation.
Requirements for electrical supply, wiring, grounding, and component connections.
Guidelines for low voltage wiring, thermostat location, and control connections.
Details of the limited lifetime warranty for the heat exchanger and other parts.
A table for recording essential furnace installation and service information.