EasyManuals Logo

Napoleon LD485RSIB User Guide

Napoleon LD485RSIB
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
6
www.napoleongrills.com























1. Open grill lid. 1. Open grill lid. 1. Open side burner cover.
2. Push and turn any main burner knob
slowly to the ’hi’ posion. This acon
will ignite the pilot ame which will in
turn light the selected burner. If the pilot
lights, connue to push down on the
control knob unl the burner lights and
then release.
2. Remove the warming rack. 2. Push and turn side burner control to
high posion.
3. If the pilot does not ignite, then
immediately turn the control knob back to
the ‘o posion and repeat step 2 several
mes.
3. Push and turn the rosserie burner
control knob slowly to the ‘hi’ posion.
This acon will ignite the pilot ame
which will in turn light the burner. If the
pilot lights, connue to push down on the
burner control knob unl the burner lights
then release.
3. Press and hold igniter buon unl
burner lights, or light by match.
4. If the pilot and burner will not ignite
within 5 seconds, turn the control knob to
the ‘o’ posion and wait 5 minutes for
any excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
4. If the burner does not ignite, then
immediately turn the control knob back to
the ‘o’ posion and repeat step 3 several
mes.
4. If the burner will not ignite within 5
seconds, turn the control knob to the ‘o
posion and wait 5 minutes for any excess
gas to dissipate. Either repeat steps 2 and
3 or light with a match.
5. If lighng the unit with a match, clip the
match into the supplied lighng rod. Hold
the lit match down through the grill and
sear plate while turning the corresponding
burner valve to high.
5. If the burner will not ignite within 5
seconds, turn the control knob to the ‘o
posion and wait 5 minutes for any excess
gas to dissipate. Either repeat steps 3 and
4 or light with a match.


Do not use the rear burner (rotisserie burner) with the main burners operating.

Other manuals for Napoleon LD485RSIB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Napoleon LD485RSIB and is the answer not in the manual?

Napoleon LD485RSIB Specifications

General IconGeneral
BrandNapoleon
ModelLD485RSIB
CategoryGrill
LanguageEnglish

Related product manuals