To Next PageTo Next Page
Need help?Do you have a question about the Napoleon LEGEND LD3 and is the answer not in the manual?
General| Type | Gas Grill |
|---|---|
| Fuel Type | Propane |
| Burners | 3 |
| Material | Stainless Steel |
| Ignition | JETFIRE Ignition System |
| BTU Output | 48, 000 BTU |
Explains warranty terms, exclusions, and definitions of "normal private use" and "failure."
Step-by-step instructions for correctly installing and connecting a propane cylinder.
Focuses on ensuring the gas regulator hose is free of kinks and properly connected to the cylinder valve.
Instructions for connecting the grill to a natural gas supply, requiring a licensed fitter.
Specific sequence for lighting the primary burners, including pilot ignition and safety intervals.
Instructions for igniting the side burner, either using the igniter or a match.
Explains preheating, searing, direct/indirect cooking methods for various foods.
Details how to use flame and infrared side burners safely and effectively.
Describes the normal odor during first use and the recommended burn-in process.
Crucial steps to prevent damage and cracking of ceramic infrared burner surfaces.
Guide to cleaning cooking grids, warming racks, and cast iron grates, including seasoning.
Instructions for cleaning the control panel and infrared burner surfaces.
Steps for cleaning the grill's interior, including sear plates and debris removal.
Procedures for cleaning the drip pan and replacing the disposable grease tray regularly.
Methods for cleaning exterior surfaces, including painted, porcelain, and stainless steel parts.
Information on adjusting air shutters for optimal flame appearance and performance.
Step-by-step guide for loosening, adjusting, and retightening air shutter screws for proper burner function.
Procedures for cleaning burners, addressing spider webs, and preventing related flame issues.
Critical steps for safe burner reinstallation, ensuring proper valve seating to prevent explosions.
Guidance on cleaning aluminum castings and refinishing them to prevent oxidation spots.
Details required information for warranty claims, including proof of purchase and part descriptions.
