7 Remote control ELT-400
7-20
SYST:ERR?[CR]<LF>
Response:
<param><CR><LF>
Meaning:
Queries the error status resulting from the last command used. The
response value indicates the correct interpretation of the previously sent
command or the instrument status.
param Explanation
0 No error
-109 Incomplete parameter
-110 Unknown command
-224 Parameter value outside range limits
-290 Incorrect probe type connected
-300 Instrument is not (yet) in measurement phase
-310 No probe connected
-400 No data ready
Table 7-14 SYST:ERR command response values
To Next Page
Loading...
