8 Specifications ELT-400
8-4
Measurement uncertainty
Note: The following influence quantities must also be taken into account:
• Frequency response at the selected band limits:
10 Hz, 30 Hz, 400 kHz: -3 dB ±1 dB
1 Hz: -3 dB ±2 dB
• Sufficient signal to noise ratio
Result display
Measurement uncertainty ± 4 % (50 Hz to 120 kHz)
Result display,
selectable
Instantaneous value or maximum value (MAX
HOLD)
Display type Digital
Digital display resolution 4 digits
Refresh rate 4 times per second
Units, selectable mT or µT
To Next Page
Loading...
