Nashuatec d418 - Selecting Copy Paper

Basic Functions
33
2
❒ When the Toner Saving mode is
specified , the whole image gets
lighter.
❒ When you cannot make clear
copies, you can adjust the quali-
ty level of copies for each of the
original types (Text, Text·Photo,
Photo). See ⇒ P.63 “If You Can-
not Make Clear Copies”
Selecting Copy Paper
There are two ways to select copy pa-
per:
❖
❖❖
❖
Auto Paper Select
The machine selects a suitable size
of copy paper automatically based
on the original size and the repro-
duction ratio.
Note
❒ When the original is set at a dif-
ferent direction from the copy
paper in the paper tray with
Auto Tray Switch mode ON, the
machine automatically rotates
the original image by 90° to
match the copy paper direction
(the paper tray unit (option) is
required.). This applies to the
following paper sizes:
Reference
For Auto Tray Switch, see “13.
Auto Tray Switch” in the Sys-
tem Settings.
❖
❖❖
❖
Manual Paper Select
You can select the desired copy pa-
per size manually. You can also se-
lect the bypass tray.
Reference
See ⇒ P.39 “Copying from the By-
pass Tray”.
Note
❒ When you use Auto Paper Select,
refer to the following table for pos-
sible copy paper sizes and direc-
tions. (if the ratio is 100%)
Metric version A4
KL
, B5
KL
Inch version
8
1
/
2
"
×
11"
KL