Nastec VASCO - 11 Technical Assistance

32
11. Technical Assistance
For more technical information contact the authorized reseller providing the following information. The solution to the
problem will be found faster and easier if full information is provided.
Model/Serial Code
LCD version (shown when VASCO is power
supplied)
LCD = _.__
INV version (shown when VASCO is power
supplied)
INV = _.__
Line Voltage: ___ [V]
Line Frequency: 50 Hz 60 Hz
description of problem:
installation type: wall mounted on motor fan cover
motor type: single phase three phase
submersible surface
if submersible: cable lenght [m]: _____
if sommersible: cable section [mm
2
]:____
P2 motor [kW]:____
rated motor Volt [V]:___
rated motor Amp [A]:__
rated motor Hz:___
if single phase: capacitor
_____ [UF]
if singlephase: starting Amp
I st = _____ [A]
pump performances
Q = ____ [l/min]
H = ____ [m]
tank volume: _____ [liters]
precharge pressure: _____ [bar]
number of DOL pumps: ___
number of COMBO pumps: ___
medium ambient temperature:
_____ [°C]
pressure sensor
4 mA = ___ [bar]
20 mA = ___[bar]
digital inputs used:
digital ouputs used:
electric and hydraulic scheme of the system (more detailed as possible)
set parameters: please fill the instal. param. and adv. param columns in the software scheme.