National Instruments 636 Series

Index
I-2 | ni.com
Simultaneous MIO X Series devices,
4-50
ai/ConvertClock, 4-27
ai/ConvertClockTimebase, 4-30
ai/HoldCompleteEvent
MIO X Series devices, 4-30
Simultaneous MIO X Series devices,
4-50
ai/PauseTrigger
MIO X Series devices, 4-34
Simultaneous MIO X Series devices,
4-55
ai/ReferenceTrigger
MIO X Series devices, 4-32
Simultaneous MIO X Series devices,
4-53
ai/SampleClock
MIO X Series devices, 4-24
Simultaneous MIO X Series devices,
4-48
ai/SampleClockTimebase
MIO X Series devices, 4-26
Simultaneous MIO X Series devices,
4-49
ai/StartTrigger
MIO X Series devices, 4-30
Simultaneous MIO X Series devices,
4-50
analog
comparison event, routing, 11-4
comparison event, signal, 11-3
edge triggering, 11-4
with hysteresis, 11-4
trigger actions, 11-3
trigger types, 11-4
triggering, 11-2
analog input
channels, 11-3
charge injection, C-1
crosstalk when sampling multiple
channels, C-1
differential, troubleshooting, C-1
ghost voltages when sampling multiple
channels, C-1
MIO X Series devices, 4-1
AI Convert Clock, 4-27
AI Convert Clock Timebase, 4-30
AI Hold Complete Event, 4-30
AI Pause Trigger, 4-34
AI Reference Trigger, 4-32
AI Sample Clock, 4-24
AI Sample Clock Timebase, 4-26
AI Start Trigger, 4-30
channels, sampling with AI Sample
Clock and AI Convert Clock,
C-2
circuitry, 4-1
connecting, 4-10
connecting signals, 4-10
connecting through I/O connector,
4-1
data acquisition methods, 4-9
getting started with applications in
software, 4-35
ground-reference settings, 4-1
MUX, 4-1
range, 4-2
sampling channels with AI Sample
Clock and AI Convert Clock,
C-2
signals, 4-22
timing signals, 4-22
triggering, 4-10
Simultaneous MIO X Series devices
AI Hold Complete Event, 4-50
AI Pause Trigger, 4-55
AI Reference Trigger, 4-53
AI Sample Clock, 4-48
AI Sample Clock Timebase, 4-49
circuitry, 4-36
connecting signals, 4-41
connecting through I/O connector,
4-36
data acquisitions, 4-38
methods, 4-38
fundamentals, 4-36
overview, 4-36
signals, 4-45
terminal configuration, 4-37
timing signals, 4-45