Index
I-10 | ni.com
specifications, A-38
NI 6358/6368/6378
accessory options, A-40
cabling options, A-40
pinout, A-39
specifications, A-40
NI 6363
USB BNC pinout, A-31
NI 6365, A-41
accessory options, A-43
cabling options, A-43
pinout, A-41
specifications, A-43
NI 6374
accessory options, A-45
cabling options, A-45
pinout, A-44
specifications, A-45
NI 6375, A-46
accessory options, A-48
cabling options, A-48
pinout, A-46
specifications, A-48
NI USB 6361
BNC pinout, A-24
NI USB-6356/6366 BNC
pinout, A-37
NI-DAQmx
default counter terminals, 8-42
documentation, B-1
installation, 1-3
NI-PGIA
MIO X Series devices, 4-2
Simultaneous MIO X Series devices,
4-36
non-buffered
hardware-timed acquisitions
Simultaneous MIO X Series
devices, 4-40
non-referenced single-ended connections
using with floating signal sources
MIO X Series devices, 4-16
using with ground-referenced signal
sources
MIO X Series devices, 4-20
when to use with floating signal sources
MIO X Series devices, 4-12
when to use with ground-referenced
signal sources
MIO X Series devices, 4-18
NRSE connections
using with floating signal sources, 4-16
using with ground-referenced signal
sources, 4-20
when to use with floating signal sources,
4-12
when to use with ground-referenced
signal sources, 4-18
O
on-demand
acquisitions
MIO X Series devices, 4-9
Simultaneous MIO X Series
devices, 4-38
edge counting, 8-4
timing
MIO X Series devices, 4-9
Simultaneous MIO X Series
devices, 4-38
order of channels for scanning (MIO X Series
devices), 4-7
other, software, installing, 1-3
output
signal glitches, C-2
minimizing, 5-2
terminal, routing analog comparison
events, 11-4
outputs, using RTSI as, 9-6
overview, 2-1
P
pause trigger, 8-45
PCI Express disk drive power connector, 3-6
period measurement, 8-20
PFI, 7-1
connecting input signals, 7-4
exporting timing output signals using
PFI terminals, 7-2
filters, 7-4
To Next Page
Loading...
