Index
I-14 | ni.com
internal source less than 40 MHz, 8-47
synchronizing multiple devices, 9-3
T
technical support, B-4
terminal configuration
analog input
MIO X Series devices, 4-1
Simultaneous MIO X Series
devices, 4-36
terminals
connecting counter, 8-42
NI-DAQmx default counter, 8-42
Timebase
100 kHz, 9-2
100 MHz, 9-2
20 MHz, 9-2
timed acquisitions
MIO X Series devices, 4-9
Simultaneous MIO X Series devices,
4-38
timing output signals, exporting using PFI
terminals, 7-2
training, B-4
transducers, 2-8
trigger, 11-1
analog actions, 11-3
arm start, 8-45
pause, 8-45
PXI, 9-8
PXI_STAR, 9-8
Star Trigger, 9-8
start, 8-45
triggering, 11-1
analog accuracy, 11-6
analog actions, 11-3
analog edge, 11-4
analog edge with hysteresis, 11-4
analog input
MIO X Series devices, 4-10
Simultaneous MIO X Series
devices, 4-40
analog input channels, 11-3
analog types, 11-4
analog window, 11-6
APFI <0, 1> terminals, 11-2
counter, 8-45
with a digital source, 11-1
with an analog source, 11-2
troubleshooting
analog input, C-1
analog output, C-2
counters, C-2
two-signal edge-separation measurement,
8-24
buffered, 8-25
single, 8-24
types of analog triggers, 11-4
U
USB BNC, 1-7
USB BNC devices, 1-5
USB Signal Stream, as a transfer method,
10-2
USB X Series
bulk transfers, 10-2
cable strain relief, 1-9
desktop use, 1-7
device security, 1-9, 1-10
DIN rail mounting, 1-8
panel mounting, 1-7
security cable slot, 1-9, 1-10
USB cable strain relief, 1-9
wall mounting, 1-7
using
low impedance sources (MIO X Series
devices), 4-7
PFI terminals
as static digital I/Os, 7-3
as timing input signals, 7-2
to export timing output signals, 7-2
RTSI
as outputs, 9-6
terminals as timing input signals,
9-6
short high-quality cabling (MIO X Series
devices), 4-7
the disk drive power connector (PCI
Express), 3-6
To Next Page
Loading...
Need help?
General
