National Instruments 636 Series User Manual

X Series User Manual
© National Instruments | I-13
analog input
MIO X Series devices, 4-22
Simultaneous MIO X Series
devices, 4-45
analog output, 5-5
AO Pause Trigger, 5-7
AO Sample Clock, 5-8
AO Sample Clock Timebase, 5-10
AO Start Trigger, 5-6
Change Detection Event, 6-19
connecting analog input
MIO X Series devices, 4-10
connecting analog output, 5-5
connecting counter, C-2
connecting digital I/O, 6-24
connecting PFI input, 7-4
Counter n A, 8-39
Counter n Aux, 8-38
Counter n B, 8-39
Counter n Gate, 8-37
Counter n HW Arm, 8-39
Counter n Internal Output, 8-41
Counter n Sample Clock, 8-40
Counter n Source, 8-36
Counter n TC, 8-41
Counter n Up_Down, 8-39
Counter n Z, 8-39
counters, 8-36
DI Sample Clock, 6-4
DO Sample Clock, 6-13
exporting timing output using PFI
terminals, 7-2
FREQ OUT, 8-41
Frequency Output, 8-41
minimizing output glitches, C-2
output, minimizing glitches on, 5-2
simple pulse generation, 8-27
single
point edge counting, 8-4
pulse generation, 8-27
retriggerable, 8-29
with start trigger, 8-27
pulse-width measurement, 8-6
semi-period measurement, 8-11
two-signal edge-separation
measurement, 8-24
single-ended connections
for floating signal sources
MIO X Series devices, 4-17
RSE configuration
MIO X Series devices, 4-17
software, 1-3
AI applications
Simultaneous MIO X Series
devices, 4-56
configuring AI ground-reference
settings (MIO X Series devices), 4-6
programming devices, 2-10
software-timed
acquisitions
MIO X Series devices, 4-9
Simultaneous MIO X Series
devices, 4-38
generations, 5-3, 6-11
specifications
device, 1-10
NI 6320, A-3
NI 6321/6341, A-7
NI 6345/6355, A-13, A-17, A-20
NI 6351/6361, A-26
NI 6353/6363, A-32
NI 6356/6366/6376, A-38
NI 6358/6368, A-40
NI 6358/6368/6378, A-40
NI 6365, A-43
NI 6374, A-45
NI 6375, A-48
stacking, 1-7
start trigger, 8-45
static DIO, 6-2
using PFI terminals as, 7-3
strain relief, 1-9
switching from a large to a small input range
(MIO X Series devices), 4-7
synchronization modes
100 MHz source, 8-47
external source greater than 40 MHz,
8-47
external source less than 40 MHz, 8-47

National Instruments 636 Series Specifications

General

Brand	National Instruments
Model	636 Series
Category	Data Loggers
Language	English