Index
I-12 | ni.com
MIO X Series devices, 4-13
when to use with ground-referenced
signal sources
MIO X Series devices, 4-19
related documentation, B-1
retriggerable single pulse generation, 8-29
routing
analog comparison event to an output
terminal, 11-4
clock, 9-1
digital, 9-1
RSE configuration
MIO X Series devices, 4-17
RSE connections
using with floating signal sources
MIO X Series devices, 4-17
when to use with floating signal sources
MIO X Series devices, 4-13
when to use with ground-referenced
signal sources
MIO X Series devices, 4-19
RTSI, 9-4
connector pinout, 3-7, 9-5
filters, 9-7
using as outputs, 9-6
using terminals as timing input signals,
9-6
rubber feet, 1-7
S
sample clock
edge counting, 8-4
measurement, 8-23
scanning speed (MIO X Series devices), 4-8
SCC, 2-9
SCXI, 2-9
self-calibration, 1-4
semi-period measurement, 8-10
implicit buffered, 8-11
single, 8-11
sensors, 2-8
settings
analog input ground-reference
MIO X Series devices, 4-4
AO reference selection, 5-2
short high-quality cabling (MIO X Series
devices), 4-7
signal conditioning
options, 2-9
signal connections
analog input
Simultaneous MIO X Series
devices, 4-41
signal descriptions, 3-2
signal routing, RTSI bus, 9-4
signal sources
floating
MIO X Series devices, 4-12
Simultaneous MIO X Series
devices, 4-41
ground-referenced
MIO X Series devices, 4-17
Simultaneous MIO X Series
devices, 4-41
signals
AI Convert Clock, 4-27
AI Convert Clock Timebase, 4-30
AI Hold Complete Event, 4-30
Simultaneous MIO X Series
devices, 4-50
AI Pause Trigger
MIO X Series devices, 4-34
Simultaneous MIO X Series
devices, 4-55
AI Reference Trigger
MIO X Series devices, 4-32
Simultaneous MIO X Series
devices, 4-53
AI Sample Clock
MIO X Series devices, 4-24
Simultaneous MIO X Series
devices, 4-48
AI Sample Clock Timebase
MIO X Series devices, 4-26
Simultaneous MIO X Series
devices, 4-49
AI Start Trigger
MIO X Series devices, 4-30
Simultaneous MIO X Series
devices, 4-50
To Next Page
Loading...
Need help?
General
