A-8 | ni.com
Appendix A Controller Operating System and BIOS Configuration
Boot Settings Configuration Submenu
Use this submenu to apply alternate configurations to boot settings. Normally, you do not need
to modify these settings, as the factory default settings provide the most compatible and optimal
configuration.
• Setup Prompt Timeout—This setting specifies the number of seconds the system will
wait for a BIOS Setup menu keypress (the <Delete> key). The default value is 2 seconds.
• Bootup NumLock State—This setting specifies the power-on state of the keyboard
NumLock setting. The default value is On.
Hard Drive BBS Priorities Submenu
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot priority of
hard drive devices. The highest priority device is displayed on the main Boot Option Priorities
list. Optionally, each device can also be disabled if the device should never be used as a boot
device.
CD/DVD ROM Drive BBS Priorities Submenu
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot priority of
CD/DVD ROM drive devices. The highest priority device is displayed on the main Boot Option
Priorities list. Optionally, each device can also be disabled if the device should never be used as
a boot device.
Floppy Drive BBS Priorities Submenu
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot priority of
floppy drive devices. The highest priority device is displayed on the main Boot Option Priorities
list. Optionally, each device can also be disabled if the device should never be used as a boot
device.
Network Device BBS Priorities Submenu
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot priority of
network devices. The highest priority device is displayed on the main Boot Option Priorities list.
Optionally, each device can also be disabled if the device should never be used as a boot device.
To Next Page
Loading...
Need help?
General
