National Instruments PCI-8430 - Page 157

DeleteaSerialInterface
BeforeyouphysicallyremoveaserialinterfacefromyourWindows
system,followthesestepstoremovethehardwareinformation:
1. LaunchMAX.
2. ExpandtheDevicesandInterfacesdirectorybyclickingthe+
nexttothefolder.
3. Right-clickonyourserialinterfaceandselectDeletefromthe
drop-downmenuthatappears.
4. Whenprompted,clicktheYesbuttontoconfirmtheremovalof
yourinterface.
5. MAXautomaticallyupdatesthelistofinstalledserialinterfaces.
YoucanalsoselectView»Refreshtoupdatethelist.
OnLabVIEWRT,itisnotnecessarytoprogrammaticallydeletehardware
fromthesystem.SimplypowerdownyourRTcontrollerandremovethe
hardware.WhenyoupoweronyourRTcontrolleragain,theportsare
automaticallyremovedfromthesystem.YoumayneedtorefreshMAXto
seethechanges.