National Instruments PXIe-8267 User Manual

Storage 5% to 95% noncondensing (Tested in accordance with IEC-60068-2-78.)
Pollution Degree 2
Maximum altitude 2,000 m (800 mbar)
Indoor use only.
Note For complete specifications, refer to the PXIe-8267 Specifications
at ni.com/manuals.
Note For more information about thermal considerations, go to ni.com/
info and enter the Info Code raidsupport.
1
The PXIe-8267 requires a chassis with slot cooling capacity ≥58 W. Not all chassis
with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer
to the PXI Chassis Manual for specifications to determine the ambient temperature
ranges your chassis can achieve.
2
Drive utilization and storage temperatures will have an impact on unpowered data
retention. Visit
ni.com/info and enter the Info Code ssdtemp for more information
about the impact of temperature on drive endurance.
Hardware Installation
Note Before you begin, install and configure your chassis and controller.
Caution To protect both yourself and the chassis from electrical hazards,
leave the chassis o until you finish installing the PXIe-8267.
Attention Pour vous protéger, et protéger le châssis, contre les risques
électriques, laissez le châssis éteint tant que vous n'avez pas terminé
l'installation du PXIe-8267.
© National Instruments
5
PXIe-8267 Getting Started

National Instruments PXIe-8267 Specifications

General

Brand	National Instruments
Model	PXIe-8267
Category	Control Unit
Language	English