► To shift the selection over to reveal more room types, click on the room images to the
right and left of the selected image.
► To select the room type, click on the drop-down menu above the selected room image.
The drop-down menu below the room image allows you to select a specific room preset
within that room type.
► To adjust the overall level of the reverb, move the fader on the Reverb channel. The
amount of reverb in each channel is adjusted with the SEND knobs at the top of each mi
crophone channel.
Solid G-EQ
Solid G-EQ effect
The SOLID G-EQ is a uniquely musical EQ. Up to four frequency ranges can be adjusted
with high precision.
▪
The HZ/KHZ knobs set the center frequency that is being adjusted with the EQ.
▪
For the two mid frequency ranges, there are Q knobs to adjust the width of the bell
curve for the adjusted frequency range.
▪
The DB knobs adjust the gain boost or gain reduction of the selected frequencies.
▪ The low and the high frequencies can switch between bell curve and shelf modes by
clicking on the
BELL button.
▪
The OUTPUT knob on the right side adjusts the overall output level.
The Performance View
Mixer Page
STUDIO DRUMMER - Manual - 20
To Next Page
Loading...
Need help?
General
