EasyManuals Logo
Home>natus>Medical Equipment>XLTEK EEG32U

natus XLTEK EEG32U User Manual

natus XLTEK EEG32U
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
XLTEK EEG32U Amplifier User and Service Manual
4
Introduction
The XLTEK EEG32U amplifier offers advanced signal acquisition capabilities for accurate data
acquisition with 1kHz sampling rates and 16 bit analog-to-digital data conversion. The highest signal-to-
noise ratios and fast recovery from saturation for stable baselines are available with the EEG32U. This
rugged device was designed with extensive clinical input to meet the workflow and application needs of
the basic EEG Lab.
EEG32U features include:
USB connectivity to XLTEK Desktop or Laptop
32 referential channels
Patient-event switch interface
Photic-stimulator interface for EEG applications
WARNING: We strongly recommend that you read the Warnings and Cautions section of
this manual before operating this amplifier.
Product Intended Use
The EEG32U Amplifier is intended to be used as an electroencephalograph to acquire, display, store and
archive electrophysiological signals. The amplifier should be used in conjunction with Natus
NeuroWorks™ software to acquire scalp electroencephalographic (EEG) signals.
The EEG32U Amplifier is intended to be used by trained medical professionals, and is designed for use in
clinical environments such as hospital rooms and epilepsy monitoring units. It can be used with patients
of all ages, but is not designed for fetal use.
Essential Performance
Essential performances of the EEG32U amplifier are identified in the standard IEC 60601-2-26:2012.
Essential performance relates to the quality of the signal recorded from the amplifier. Specific essential
performances are:
(1) accuracy of signal reproduction
(2) dynamic range and differential offset voltage
(3) input noise level
(4) frequency response
(5) common mode rejection
The definition of these essential performances can be found in the standard.
Using the Manual
This manual describes the theory, features, set up, operation and maintenance of the EEG32U amplifier.
It also provides information on specifications, troubleshooting and getting help.
When reviewing the procedures, we recommend you read the entire section first, before beginning a
sequence. Please follow the instructions carefully.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the natus XLTEK EEG32U and is the answer not in the manual?

natus XLTEK EEG32U Specifications

General IconGeneral
Brandnatus
ModelXLTEK EEG32U
CategoryMedical Equipment
LanguageEnglish

Related product manuals