NV30/NV40 Operations and Maintenance Manual Operating the transmitter
Page 2-16 Issue 3.3 2014-12-10
Press User Accounts to access a page that displays a list of users with access to the AUI and,
depending on permission level, allows editing of user accounts (see User accounts on page 2-79).
Select Changeover to access a page that allows setting of the main (active) exciter and setup of
automatic exciter changeover (see Changeover page on page 2-83).
Press User Settings to access a page that allows network configuration, email configuration and
alarm notifications, setting of Exgine parameters, SNMP configuration, capturing critical parameters,
setting date and time, enabling and configuration of NTP servers and setting call sign (see User
settings on page 2-84).
Press Remote I/O to access a page that allows assignation of remote digital inputs and outputs as well
as the configuration of analog outputs (see Remote I/O page on page 2-104).
Logs page - viewing transmitter log
The Logs page allows you to review the transmitter’s event logs to check the operational status,
historical alarms, perform troubleshooting, or identify recent changes to transmitter controls. Press
Logs (located on bottom panel) on any AUI window to open this page (see Figure 2.8 on page 2-17).
This section includes the following topics:
• Viewing event logs on page 2-17
• Understanding the log manager window on page 2-19
• Filtering logs on page 2-20
• Copying logs on page 2-21
• Deleting logs on page 2-21
• Viewing the legend on page 2-24
To Next Page
Loading...
