Nautilus R628 - Install the Seat Frame Assembly to the Seat Rail and Attach Top Cap

10
5
A
E
F
6mm
X4
B
G
H
4mm
X2
B
5
2. Install the Seat Frame Assembly to the Seat Rail and Attach Top Cap
NOTICE: Do not cut the ziptie on the cables in the Frame. Do not crimp the Resistance and Heart Rate Cables.
Remove the ziptie on the Shock Assembly and seat slider bracket.
Hand tighten all hardware first, then fully tighten it. Be sure the cables are tucked inside the Top Cap.
6