Nautilus R628 - Install the Seat Recline Handle and Connect the Shock Assembly to the Seat Back

12
4. Install the Seat Recline Handle and Connect the Shock Assembly to the Seat Back
Note: Put the end of the Seat Recline Handle through the opening in the Shock Shroud. Push the Seat Recline
Handle through the holes in the Shock bracket (1a) and tighten the Thin Nut (L) and Serrated Washer (O) onto
the Handle.
Align holes in the Seat Recline Arm (8a) and Shock Assembly (1b), and install the bolt (K) through the holes.
Install the Shock Shroud to the Frame.
L
O
K
M
10
#2
M
10
9
L
9
1a
8a
1b
K
6mm
9
10
O
** Shock Shroud (10) is not shown for clarity.
**
**
**