Nautilus R628 - Specifications; Before Assembly; Basic Assembly Tips

6
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
KDUGOHYHOVXUIDFH$OORZDZRUNRXWDUHDRIDPLQLPXPP[P´[´
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important
6DIHW\,QVWUXFWLRQV´EHIRUHDVVHPEO\
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, gently lift
and look through the bolt holes to help
insert the bolt through the holes.
• 7KHDVVHPEO\FDQUHTXLUHSHRSOH
Maximum User Weight: 147.4 kg (325 lbs.)
Total Surface Area (footprint) of equipment: 11 457 cm2
Machine Weight: 50.4 kg (111.1 lbs.)
Power Requirements:
 2SHUDWLQJ9ROWDJH 99$&+]
Operating Current: 2A
Heart Rate Chest Strap: 1 CR2032 battery
124 cm
(48.8”)
171 cm
(67.3”)
67 cm
(26.4”)
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
2.9m ( 115” )
1.9m
( 74” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )