Nautilus T618 - Features

26
Is the issue still
present?
Issue resolved
Are both edges of
the belt covered by
plastic side covers?
Check Walking Belt
Alignment (refer to
“Aligning the Walking Belt”
in Owner’s Manual.
BEGIN HERE
Replace Rear Roller
Is the issue still
present?
Contact
Tech Support at
800.861.7401
for further assistance.
Issue resolved
Run the Belt at
low speed and attempt
to stop the Belt with your
foot. Does Belt
slip?
NO
Align the Walking Belt
Can Belt be
aligned?
Align the Walking Belt
tension
Shut off machine and wait
5 minutes. Remove Motor
Cover.
Issue resolved
Is the Drive Belt
tight?
Is the issue still
present?
Refer to “Replace the
Drive Belt” procedure in
the service manual to
adjust the Drive Motor Belt
tension.
YES
Belt Alignment / Slipping / Hesitation
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO