What to do if my Nautilus Treadmill belt stops moving?
First, ensure the Safety Key is properly plugged into the console. Also, the unit may be overloaded, causing the power to shut off to protect the motor. In this case, follow the maintenance schedule for belt lubrication, ensure the walking belt tension is correct, and then restart the unit.
How to troubleshoot a Nautilus T614 with no display?
First, ensure the treadmill is plugged into a functioning wall outlet by testing the outlet with another device. Check the power cord and its connection to the unit for any damage, replacing if necessary. Inspect the cable wires for crimps or cuts and replace the cable if any damage is found. Ensure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. If there are visual signs that the console display is cracked or damaged, replace the console. If the console only shows a partial display and all connections are fine, replace the console.
Why does my Nautilus Treadmill console shut off during use?
Ensure the treadmill is plugged into a functioning wall outlet by testing the outlet with another device. Check the adapter and its connection to the unit for any damage, replacing if necessary. Inspect the cable wires for cuts or crimps and replace the cable if any damage is found. Make sure the cable is securely connected and properly oriented, with the small latch on the connector lined up and snapped into place. If the issue persists, unplug the unit from the electrical outlet for 3 minutes, then reconnect it.
How to fix a slipping walking belt on my Nautilus T614 Treadmill?
Adjust the belt tension at the rear of the machine. Refer to the procedure for adjusting belt tension in this manual.
How do I align the walking belt on my Nautilus Treadmill?
First, make sure the machine is level. Then, ensure the walking belt is centered and the tension is correct. Refer to the procedures for leveling the machine and adjusting tension and aligning the belt in this manual.
Why isn't the telemetric heart rate displaying on my Nautilus T614?
Ensure that the strap is 'POLAR®' compatible and uncoded. Make sure the strap is directly against the skin and the contact area is wet, with the curve of the transmitter oriented upward. Also, select the Edit User Profile option and ensure that the WIRELESS HR setting is set to ON. Try moving the unit away from sources of interference such as TVs and microwaves. If eliminating interference doesn't work, replace the strap.
What to do if Contact HR is not displayed on Nautilus T614?
Ensure your hands are centered on the HR sensors and kept still, with relatively equal pressure applied to each side. Note that sensors may have difficulty with dried-out or calloused hands. A conductive electrode cream (heart rate cream) can help improve contact. These creams are available online or at medical and some larger fitness stores.
Why does the motor on my Nautilus Treadmill sound strained?
Apply silicone to the inner surface of the walking belt. Refer to the belt lubrication procedure in this manual.
Why is the Telemetric HR displayed incorrectly on my Nautilus Treadmill?
Make sure that the HR receiver is not blocked by a personal electronic device in the left side of the media tray.
Why won't the fan turn on, but the console operates on my Nautilus Treadmill?
Unplug the unit from the electrical outlet for 5 minutes. Remove any material from the fan. If necessary, detach the Console to help with removal. Replace the Console if you are unable to remove the blockage.
General| Speed Range | 0-12 MPH |
|---|---|
| Incline Range | 0-15% |
| Foldable | Yes |
| Decline | No |
| Bluetooth | Yes |
| Cooling Fan | Yes |
| Running Surface | 20" x 60" |
| Display | Blue Backlit LCD |
| Heart Rate Monitoring | Contact and Telemetry Enabled |
| Dimensions | 72.2" L x 35.2" W x 57.6" H |
| Weight | 215 lbs |
| Audio | Yes |
Critical safety guidelines and warnings for operating the treadmill.
Identifies warning labels and location of the serial number for product identification.
Proper grounding procedures and electrical safety precautions for the treadmill.
Instructions on how to quickly stop the treadmill in an emergency situation.
Procedures for a final inspection to ensure all parts are secure and correctly assembled.
Steps for initial setup, including date, time, units, and power-up procedures.
To Next Page
