10
Tools
Included Not Included
(recommended)
Item Qty Description Item Qty Description
A 4
Socket Head Hex Screw, M8x50
D
10
Self Tapping Screw, M4.2x16
B 8 Socket Head Hex Screw, M8x16 E
12
Lock Washer, M8
C
2
Phillips Head Screw, M5x14 F
12
Flat Washer, M8
A B D
C E F
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 83.2” x 151.2” (211.3 cm x 384 cm). Be sure that the workout space
you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of
the machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
HARDWARE / TOOLS / BEFORE ASSEMBLY
#2
6 mm
6 mm
To Next Page
Loading...
Need help?
General
