98
25.Makesurethereissufcientspacetolowerthewalkingdeck.
Keep a minimum clearance behind the machine of 79” (2
m) and 24” (0.6 m) on each side. This is the recommended
safe distance for access, movement and emergency
dismounts from the machine.
26. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
27. Slightly push the walking deck forward toward the console, and
then push the Deck Release Handle until the locking tube releases
and you can pull the walking deck away from the console. Hold up
the rear of the walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
28. The hydraulic lift is set up to drop gradually. Hold onto the walking
deckuntilapproximately2/3ofthemovementdown.Makesurethat
you use proper lifting technique; bend your knees and keep your
back straight. Be aware that the walking deck can possibly drop
quickly in the last part of the movement
29. Re-install all remaining parts that were removed in reverse order.
Note: When re-attaching the Console Backing, be sure to attach the
hardwaremarkedwiththe(*)rst,thenthehardwarewiththe(**),
followed by the remaining hardware.
Be sure to follow all warnings when rotating the Walking
Deck and lowering the Walking Deck.
30. Final Inspection
Inspect your machine to ensure that all hardware is tight and compo-
nents are properly assembled.
Do not use until the machine has been fully assembled
and inspected for correct performance in accordance
with the Owner’s Manual.
*
*
**
**
To Next Page
Loading...
Need help?
General
