Nautilus U627 - Specifications and Basic Assembly Tips

7
SPECIFICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum2.4mx1.8m(93.1”x69.3”).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the “Impor-
tant Safety Instructions” before
assembly.
2. Collect all the pieces necessary for
each assembly step.
3. Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
4. When attaching 2 pieces, gently
lift and look through the bolt holes
to help insert the bolt through the
holes.
5. The assembly can require 2 people.
Maximum User Weight: 150 kg (330 lbs.)
Total Surface Area (footprint) of equipment: 6524 cm2
Machine Weight (approximate):34kg(75lbs.)
Power Requirements: 120V 220V
 OperatingVoltage: 110-127VAC, 220-240VAC,
60Hz 50/60Hz
Operating Current: 4A 2A
DO NOT dispose of this product as refuse. This
product is to be recycled. For proper disposal of this
product, please follow the prescribed methods at an
approved waste center.
0.6m
24”
1.7m
69.3”
2.4m
93.1”
0.6m
24”
0.6m
24”
0.6m
24”
116.5cm + 120cm = 236.5cm (93.1”)
56cm + 120cm = 176cm (69.3”)
56 cm (22”)
116.5 cm (45.9”)
140 cm
(55.1”)